Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the Fiat Tipo key?

Model: Fiat Tipo 356, 358, 357 - Years 2016-2026
Part: Key

To be able to remove the Fiat Tipo key, you have to go and press the button in the upper part of the device, so that you can pry inside its housing: this will allow you to detach the plastic cover in the rear part, so to remove the battery located inside. Once the battery has been removed, the additional screws located inside the key can be loosened, in order to open it completely and access the internal coding chips. The necessary parts can then be replaced, going to assemble the device again.

Posted on 14 January 2023 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Inner Door Trim of the Fiat Tipo?
How to Remove the Inner Door Trim of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 358, 357) The vehicle shown in the video above is a Fiat Tipo, and now we will explain how to remove the inner door panel if necessary. The steps to follow are…
How to replace the battery of the Fiat Tipo key
Fiat Tipo (2016-2026 / 356, 358, 357) If you want to replace the battery inside the key of your second edition Fiat Tipo by yourself, you must carefully read the following guide and follo…
How to program the Fiat Tipo remote control
How to program the Fiat Tipo remote control
Fiat Tipo (2016-2026 / 356, 358, 357) In this video we will show you how to program the Fiat Tipo remote control. If you have lost your remote control key, go to a shop specializing in du…

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos