Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Tail light bulb

In this tutorial, see how to replace the rear light bulbs on a Fiat 500, a very simple and quick operation. First, ensure the key is not in the ignition, then open the boot. Locate the two bolts along the inner edge of the light unit and remove them using a 10 mm socket spanner. Once done, grasp the light unit, pull it towards you, and detach it from the bodywork. At this point, disconnect the power connector, remove the internal plate, and proceed to replace the faulty bulb.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Position Light on Fiat 500
Replace Position Light on Fiat 500
Fiat 500 (2007-2021 / 312) Replace the bulbs in the front lights on a Fiat 500. Lift the bonnet to access the front lights and begin removing the bulbs. Disconnect the cover ca…
How to Replace the Rear Lights on the Fiat 500 Abarth
How to Replace the Rear Lights on the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In this video tutorial, you will see how to remove and replace the original rear lights with those from the facelift version on the Fiat 500, includi…
Replacing the Rear Lights on the Fiat 500 Abarth
Replacing the Rear Lights on the Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) In today's tutorial video, you will find the instructions to remove and replace the rear lights with those from the facelift version of the Fiat 500 …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos