Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car Radio in a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Car stereo

This brief video tutorial shows how to replace the car radio in a second-generation Fiat Panda, produced from 2003 to 2012. Perform this operation with the vehicle turned off, and all you need are the two special extraction pins. First, insert the two extraction pins into the appropriate slots on either side of the radio. Then, pull the two pins towards you while also prising them outwards to extract the radio. Next, disconnect the antenna cable and the two connectors at the back of the radio. Finally, fit a new radio by reversing the procedure.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in a Fiat Panda
How to Replace the Radio in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you start, sit in the driver’s seat of your Fiat Panda. Begin by inserting the extraction keys into the holes on the front of the radio. This …
How to install a 2 DIN car radio in the Fiat Panda?
How to install a 2 DIN car radio in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To install a 2 DIN car radio in the Fiat Panda 169, first remove the old car radio and detach the glove compartment from the passenger side. This wil…
How to Replace the Car Radio in a Fiat Panda?
How to Replace the Car Radio in a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) .. In this tutorial, you will learn how to replace the car radio in a Fiat Panda, a very simple and quick operation. First, ensure that the.. …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos