Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Antenna and Its Base on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Antenna

In this short and simple guide, we will outline the main instructions to remove and replace the antenna and its base on the Fiat Panda. First, open the bonnet and start by removing the rear roof lining using plastic levers; then unscrew the nut of the antenna base, followed by disconnecting the electrical connector, as illustrated in the video. Now replace the antenna with the new one of the correct type; install it properly on the roof of the vehicle, following the video tutorial to the end!

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD Port in a Fiat Panda?
Where is the OBD Port in a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) If you need to connect a professional diagnostic tool to your Fiat Panda but do not know where the OBD port is located, do not worry as you will find…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos