Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : LED lights installation instructions

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Accessory Kit
Operation: LED lights installation instructions

The installation of LED bulbs in the passenger compartment will give the car a much more modern and captivating look; many manufacturers of these bulbs offer special kits already prepared with the right number and model of bulbs to perform the restyling. Those proposed by this manufacturer can also be installed in any position, that is, it is not necessary to respect the polarity of the power supply to make them switch on. Therefore, start with the interior light ceiling light, unhooking it from the ceiling and then open the lamp holder and replace the torpedo bulbs; then move on to the other courtesy lights with T10 connection.


Posted on 20 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos