Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Installing LED Lights

Model: Fiat 500 312 - Years 2007-2024
Part: Accessory kit

Installing LED bulbs in the cabin will give the vehicle a much more modern and appealing look; many manufacturers of these bulbs offer specific kits already prepared with the correct number and model of bulbs for the upgrade. The bulbs provided by this manufacturer can also be installed in any position, meaning there is no need to respect the power polarity to make them light up. Start by removing the cabin light from the headlining, then open the bulb holder and replace the festoon bulbs; then move on to the other courtesy lights with T10 fittings.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Installing LED Lights
Instructions for Installing LED Lights
Fiat 500 (2007-2024 / 312) Installing LED bulbs in the cabin will give the vehicle a much more modern and appealing look; many manufacturers offer specific kits already prepare…
Timing Instructions for Classic Fiat 500
Timing Instructions for Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) Let’s look at some important instructions for timing the two-cylinder engine of a classic Fiat 500. First, find the top dead centre by rotating the c…
Instructions for Assembling the Engine of the Classic Fiat 500
Instructions for Assembling the Engine of the Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In this video tutorial, you will see step-by-step instructions for assembling the twin-cylinder engine of the classic Fiat 500 after a proper overhau…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos