Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Complete conversion of Led lights Fiat 500X

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Interior lights ceiling light bulb
Operation: Complete conversion of Led lights Fiat 500X

The eye also wants its part, so today let's see how to replace the halogen lights of our Fiat. LED = greater power, long life, great resistance and the possibility of being dimmed (adjusted in intensity). We turn off the car, to avoid problems with the electricity, and open the hood. In case we remove the wiper bowl. We remove the rear headlight covers and replace the old low beam lights with new spare parts following any manufacturer's instructions. From the wheel arch we access, after a rubber cover, the fog lights. Replaced these as well, we reassemble everything and move on to the trunk. The license plate light, the central ceiling light and the rear light. It ends with the door lights. The look really benefited from it.


Posted on 13 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2021 - How to replace the light bulbs in the Fiat 500? Read Answer
    • 500 2007-2023 - Why doesn't the interior light of the Fiat 500 come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos