Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to add gearbox oil on Fiat Panda 4*4 Trekking.

Fiat Panda - Video tutorial

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Gear oil
Operation: How to add gearbox oil on Fiat Panda 4*4 Trekking.

In this video tutorial we can see how it is possible to add oil to the engine gearbox on a Fiat Panda 4*4 Trekking. Oil to use is quite thick SAE 80w-90. Lift the car with a hydraulic jack and put jack stands and a tire underneath to work more safely; under the car near the oil drain hole you need to put a used oil container. Use a 12 hex wrench to unscrew the filler cap; insert the tube inside the gearbox filling hole and pour the oil as needed inside, helping from above with a funnel. Add oil until it comes out of the hole. Clean the cap and screw it in just enough with the 12 hexagonal key and the game is done.


Posted on 22 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - How much oil do you need to change a Fiat Panda? Read Answer
    • Panda 1980-2003 - How much gear oil does the Fiat Panda 4x4 (141) need? Read Answer
    • Panda 1980-2003 - Where is the Fiat Panda 750 gear oil cap located? Read Answer
    • Panda 2003-2012 - Where are the Fiat Panda 4x4 gear oil caps located? Read Answer
    • Panda 2003-2012 - How to check the oil level in the gearbox of the Fiat Panda 1.3 mjt? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos