Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Engine Oil and Oil Filter on Fiat Argo

Model: Fiat Argo MK 1 - Years 2017-2024
Part: Engine oil

First, lift the car with a hydraulic jack and place jack stands for support. Position an oil drain pan under the oil pan. Unscrew the drain plug and allow the oil to drain into the pan. Clean the plug, and when all the oil has drained, screw it back in place. Unscrew the oil filter, remove it from its location, and replace it with a new one. Once the new filter is installed, lower the car and lift the hood. Secure it with the prop rod. Refill the engine oil (check the owner's manual to verify the type of oil needed for this vehicle) using a funnel to add the new oil.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Argo (2017-2024 / MK 1) To change the battery in the Fiat Argo remote, first remove the plastic frame surrounding the remote. Next, remove the back cover of the remote and u…
Fiat Argo (2017-2024 / MK 1) To reset the tire pressure light on a Fiat Argo, turn on the ignition to access the instrument panel. Navigate through the onboard computer menu to f…
Fiat Argo (2017-2024 / MK 1) To disable the Start&Stop feature on the Fiat Argo, you need to completely remove the dashboard panel located just below the steering column. Once th…

Other guides you may be interested in

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos