Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter of the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

See other generations:
Video tutorial

Briefly review the steps to perform the routine maintenance service by replacing the engine oil and oil filter of the Fiat Punto. First, raise the vehicle and start draining the oil by unscrewing the drain bolt found on the sump; then use the appropriate spanner to unscrew the oil filter, replacing the cartridge with a new one (screw it in by hand and tighten gently), as shown in the video.

At this point, unscrew the filler cap and top up the oil, checking the oil level with the dipstick!


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter of the Fiat Punto Evo 1.3 MultiJet
How to Change the Engine Oil and Oil Filter of the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the procedure for replacing the engine oil and oil filter while performing the regular maintenance service for the Fiat Punto Evo…
How to Replace Engine Oil, Oil Filter, and Air Filter on a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) Today, this brief guide will show you how to change the engine oil and oil filter on your Fiat Punto. It is not a very complex operation; just be car…
How to change the engine oil and oil filter on a Fiat Punto
How to change the engine oil and oil filter on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) To change the engine oil and filter on a second series Fiat Punto, start the engine for a few minutes to make the oil more fluid, then turn off the v…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - How many liters of engine oil can a 90 HP Fiat Grande Punto 1.3 MultiJet hold? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos