Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Light of the Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Interior dome light bulb

Replacing the bulb of the boot light on the Fiat 500 is a very simple task that can be done independently. The bulbs required are T10 LED bulbs rated at 12 Volts. Open the boot of the vehicle and remove the light cover by applying gentle pressure from underneath. You will see that the bulb cover will easily come out. Now, to disconnect it from the wire, use a screwdriver; once the wire is removed, you can turn the holder to the right and finally pull the bulb upwards to remove it. Take the new bulb and insert it into the holder, then reassemble everything by reversing the steps explained earlier, and you're done.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Interior Light on a Fiat 500
Replacing the Interior Light on a Fiat 500
Fiat 500 (2007-2024 / 312) Remove the interior light if damaged or if you need to replace the bulbs. Use a screwdriver to lever between the interior light and the roof trim pan…
How to Remove the Interior Light Fitting on a Fiat 500X
How to Remove the Interior Light Fitting on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this short video, you will see how to remove the interior light fitting on your Fiat 500X. This operation is quite simple, and with a little effor…
Installing Door Lights on the Fiat 500
Installing Door Lights on the Fiat 500
Fiat 500 (2007-2021 / ) In this tutorial, you will see the steps to install the lights located under the door of the Fiat 500. First, obtain the bulb kit to install on your …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos