Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Cabin air filter

In this video tutorial, see how to replace the pollen filter on a Fiat Punto. The pollen filter is a crucial component of the ventilation system, filtering the air entering the cabin from outside the vehicle, which is then breathed by those inside. The owner's manual recommends replacing the filter every 12,500 miles or once a year. Required materials: a new pollen filter and a 6mm spanner. Use the 6mm spanner to remove the two securing screws and detach the plastic cover without breaking the retaining clips. Remove the filter from its housing and fit the new one, following the direction of the arrows.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter on a Fiat Punto
How to Replace the Pollen Filter on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. How to replace the pollen filter on a Fiat Punto? Follow these steps for removal: use a plastic lever.. …
How to Replace the Pollen Filter on a Fiat Punto
How to Replace the Pollen Filter on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) .. How to replace the pollen filter on a Fiat Punto? Let's see how to perform the disassembly: unscrew the.. …
How to Change the Cabin Filter on a Fiat Punto Evo
How to Change the Cabin Filter on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to change the air conditioning pollen filter on a Fiat Punto Evo? Remove the plastic cover of the centre tunnel (right side of the tunnel), then …

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the cabin filter on the Fiat Grande Punto? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos