Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
312
- Years 2007-2023 In this tutorial, we can see how to replace the transmission oil in the Fiat 500, a very simple and fast operation. First of all, we lift the car on a bridge or with a jack, taking all necessary safety measures, then we go under the vehicle, locate the filling hole bolt and unscrew it using a hex key. Next, we move to the opposite side, unscrew the drain hole bolt and let all the oil contained in the gearbox flow out. At this point, all that remains is to tighten the last bolt and fill the new oil using a pump.
Posted on 12 May 2023 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |