Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gearbox oil in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Transmission fluid

In this tutorial we can see how to replace the gearbox oil in the Fiat 500, a very simple and quick operation, to be carried out every approximately 50,000 km. First of all, make sure that the engine is completely cold, then go under the vehicle, taking all necessary safety measures, and unscrew the first bleed screw with a 12mm hex key. Then unscrew the second bleed screw, let the oil contained in the transmission come out, and reassemble everything. At this point, all that's left to do is to pour the new oil through the appropriate upper hole.

Posted on 16 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Fiat 500 gearbox oil
How to replace the Fiat 500 gearbox oil
Fiat 500 (2007-2024 / 312) The following video tutorial aims to illustrate the steps to be taken to independently replace the gearbox oil of the Fiat 500 car. To replace the oi…
How to Replace the Gearbox Oil in a Fiat 500?
How to Replace the Gearbox Oil in a Fiat 500?
Fiat 500 (2007-2021 / ) To replace the gearbox oil in a Fiat 500, lift the car using a ramp to access the components beneath the engine bay. Locate the gearbox, which has th…
Oil Change for Fiat 500 Gearbox
Oil Change for Fiat 500 Gearbox
Fiat 500 (2007-2021 / 312) Lift the car and remove the 12 mm bolt that acts as the plug for the manual gearbox drain hole. Then, unscrew the T6 Torx screw indicated in the vide…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos