Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Fiat 500 gearbox oil

Model: Fiat 500 312 - Years 2007-2024
Part: Transmission fluid

The following video tutorial aims to illustrate the steps to be taken to independently replace the gearbox oil of the Fiat 500 car. To replace the oil in the gearbox, we must lift the vehicle and position it if possible on stands. Using a 24 mm wrench, unscrew the nut that blocks the passage of the gearbox oil and place a container; let the liquid inside escape and close the cap. Then remove the lever that locks the gearbox so that we can drain the last percentages of liquid and then top up.

Posted on 6 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How and When to Change the Gear Oil on a Fiat 500 Abarth 1.4
How and When to Change the Gear Oil on a Fiat 500 Abarth 1.4
Fiat 500 (2007-2021 / 312) In today's video, you will see the main steps to replace the gear oil on a Fiat 500 Abarth 1.4 Petrol; the gear oil should generally be changed every…
When to Change the Gear Oil on a Fiat 500?
When to Change the Gear Oil on a Fiat 500?
Fiat 500 (2007-2021 / 312) The interval for changing the gear oil varies depending on the car model; generally, for small engine cars, change the gear oil every 4 years or 50,0…
Oil Change for Fiat 500 Gearbox
Oil Change for Fiat 500 Gearbox
Fiat 500 (2007-2021 / 312) Lift the car and remove the 12 mm bolt that acts as the plug for the manual gearbox drain hole. Then, unscrew the T6 Torx screw indicated in the vide…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos