Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Gear Oil on the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2022
Part: Transmission fluid

To change the gear oil on the Fiat 500 Abarth, lift the car with a jack so that the left front wheel can be removed by unscrewing the bolts that secure it. Once the wheel is removed, loosen the screws that secure the bracket at the rear; also unscrew the screws that secure the plate at the bottom of the engine. You can then unscrew the gear oil drain plug, allowing the oil to drain into a suitably placed container; after that, insert the new oil through the designated filler hole.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2021 / 312) In today's video, you will see the main steps to replace the gear oil on a Fiat 500 Abarth 1.4 Petrol; the gear oil should generally be changed every…
Fiat 500 (2007-2021 / 312) Lift the car and remove the 12 mm bolt that acts as the plug for the manual gearbox drain hole. Then, unscrew the T6 Torx screw indicated in the vide…
Fiat 500 (2007-2024 / 312) Today's main instructions will show us the process of disassembling and replacing the gear shift knob of the Fiat 500 Abarth and Fiat 500. First, we …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos