Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on a Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2024
Part: Engine oil

Today, you will learn the steps to change the oil on a Fiat 500 Abarth. The first step is to remove the bolt securing the oil sump located at the bottom of the vehicle. Once removed, allow the old oil to drain into a container. The second step is to close the oil sump and focus on opening the engine compartment to remove the oil filter. The third step is to insert a new filter into the housing and then top up the oil. You will need approximately 3 litres of oil.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2022 / 312) Below, we will see how to reset the service light for the engine oil change on the Fiat 500 Abarth. First, get into the vehicle and connect your diag…
Fiat 500 (2007-2024 / 312) Being able to independently locate the OBD port inside your 2017 Fiat 500 Abarth can be difficult as the OBD port in question is well hidden inside t…
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos