|
Do it yourself
| |||
| ||||
How to Replace the Cabin Air Filter
Model: Fiat 500
312
- Years 2007-2024
The video guides you through the replacement of the cabin air filter.
Using a T-25 torx screwdriver, unscrew the screw that secures the central panel at the passenger's feet, then pull to disengage the clips. Using a flat screwdriver, remove the snap clips present in the lower trim of the glove compartment, as shown in the video, and take it out. Now disconnect the connector located in front of the filter cover and unscrew the screws on it and remove it. Slide the filter out of its housing and proceed with the replacement, then reassemble everything. In the video, the operation is performed on a 2012 Fiat 500, but the procedure is similar for other vehicles.
Updated on 2 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat 500
(2014-2022 /
500 X)
Replacing the cabin air filter is very important to ensure proper hygiene in the cabin and to avoid the typical bad smell that occurs when the air co…
Fiat 500
(2007-2024 /
312)
The cabin air filter is located on the passenger side, behind the glove compartment: to access the air duct housing, open the glove compartment door …
Fiat 500
(2014-2022 /
500 X)
In the following guide you will find the description of all the various steps that you need to follow to complete the replacement of the cabin air fi…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Rear Light and Bulbs on a Ford Focus Year 2000
To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.138
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |