Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Fiat Stilo

Model: Fiat Stilo MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

Video tutorial

In this video tutorial, you will learn how to remove and replace the front door panel of the Fiat Stilo in simple and quick steps. First, open the front door and start by removing the window switch panel, prying it from the sides and disconnecting the electrical connector underneath; then unscrew the fixing screws located underneath and remove the additional screws found on the sides of the door panel, as shown in the video.

At this point, pry from the sides of the panel to detach and remove it, disconnecting the handle cable!


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of a Fiat Stilo
Removing the Door Panel of a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) How to remove the door panel on a Fiat Stilo? Don't worry, follow these steps. Before starting the disassembly, disconnect the battery terminals loca…
Removing the Speaker and Door Panel from Fiat Stilo
Removing the Speaker and Door Panel from Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this video tutorial, follow the main steps to remove the speaker from a Fiat Stilo. First, you need to remove the door panel: after removing all t…
Where is the OBD port of the Fiat Stilo located?
Where is the OBD port of the Fiat Stilo located?
Fiat Stilo (2001-2010 / MK 1) To find the OBD port of your Fiat Stilo, it only takes a few seconds. All you have to do is carefully read the following guide and then follow the va…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos