Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Stilo
    4. : Removing the door panel of a Fiat Stilo

Fiat Stilo - Video tutorial

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Door panel
Operation: Removing the door panel of a Fiat Stilo

How to remove the door panel on a Fiat Stilo? Don't worry, let's see how to proceed. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. We remove the window lift control panel with a lever; with a screwdriver we go to unscrew the tightening screws placed on the plastic panel. Once all the screws have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel, unhook any power supply terminals and release cable. We carry out the necessary maintenance in the door.


Posted on 27 November 2023 by ScegliAuto



Disassembly of the loudspeaker and Fiat Stilo door panel
Fiat Stilo (2001-2010 / MK 1) In this video tutorial we will see the main steps to be able to disassemble the loudspeaker of a Fiat Stilo. To do this, we must first remove the doo
Replacement of Fiat Stilo speakers
Fiat Stilo (2001-2010 / MK 1) Let's find out the steps on how to disassemble and replace the Fiat Stilo speakers, following the instructions below. First we open the front door an
How to remove the left front door panel on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Let's see how to remove the left front door panel on Fiat Stilo: disconnect the battery terminals in the engine compartment, using a screwdriver unsc

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos