Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin and Engine Air Filters on the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Air filter

See other generations:
Video tutorial

Learn how to replace both the cabin and engine air filters on the Fiat Panda. Start with the cabin filter: remove the end section of the centre tunnel on the front passenger side to reveal the section with the filter box cover, which can be removed after unscrewing the two securing screws.

Extract the old filter element and insert the new one, ensuring it is fitted in the correct orientation. Refit the cover and reassemble the tunnel panel.

Open the bonnet and detach the retaining spring to the left of the filter box, disconnect the inlet hose, open the two levers on either side of the filter box, and lift the cover. You can now remove the old filter and replace it with the new one, ensuring correct installation, then reassemble everything in reverse order.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

Fiat Panda Air Filter Replacement
Fiat Panda (2003-2012 / 169, MK 2) Changing the air filter on a Fiat Panda? Here’s how to remove the air filter from the engine bay. Lift the bonnet and secure it. Unclip the plastics …
How to Remove the Cabin Air Filter from a Fiat Panda
How to Remove the Cabin Air Filter from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) See how to remove the cabin air filter (pollen filter) in the Fiat Panda. The cabin filter is located at the bottom left of the glove compartment. Us…
How to Remove the Cabin Air Filter in Fiat Panda
How to Remove the Cabin Air Filter in Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, see how to remove the cabin air filter in a Fiat Panda. The cabin filter is located at the bottom left of the glove compartment. Using…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos