Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Identify the Problem with a Fiat 500 Roof That Won't Close Completely

Model: Fiat 500 312 - Years 2007-2024
Part: Convertible top

In this video, we see that there are issues with the folding mechanism of the Fiat 500 convertible, which fails to close completely. The YouTuber disassembled the mechanism to access the roof's winding area, where there are flaps indicated, and a visible pin should slide upwards and stop behind a stop. To close it, however, it was necessary to lift the entire mechanism, which is acceptable for emergency closure, but not for normal operation. The stop must be adjusted so that it slides upwards, allowing the pin to slide and stop behind the stop, without overrunning it. By sliding the mechanism several times and reading the comments, we discovered that the pin must be reinserted into its holder, ensuring that the roof not only closes completely but also opens without difficulty.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Hood of the Fiat 500 Cabrio?
How to Remove the Hood of the Fiat 500 Cabrio?
Fiat 500 (2007-2021 / ) To remove the hood of the Fiat 500, press the designated button located inside the cabin to fully lower the hood. Once it is lowered, detach the fast…
How to open and close the Fiat 500 convertible roof
How to open and close the Fiat 500 convertible roof
Fiat 500 (2007-2024 / 312) The opening and closing buttons of the convertible top on a Fiat 500 are located inside the cabin, specifically on the rigid part of the roof just be…
How do you replace the soft top of the Fiat 500?
How do you replace the soft top of the Fiat 500?
Fiat 500 (2007-2024 / 312) In order to replace the soft top of the Fiat 500, you need to lower it completely so that all the fastening screws of the opening and closing mechani…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos