Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the mirror cap on the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2022
Part: Outside rearview mirror
Operation: How to replace the mirror cap on the Fiat 500?

Replacing the cover of the external rearview mirror of the Fiat 500 is an extremely simple and quick operation, let's see how to proceed in this tutorial. To do this, we will need a pair of preferably plastic spatulas, so as not to leave any marks. First of all, we move the mirror outwards, then we locate the first indicated clip and unlock it using the spatula. We continue with the clips placed on the upper and lower edge, we lever along the joint of the cover and separate it from the rest of the mirror. To mount the replacement, it will be sufficient to fit it back in.


Posted on 25 July 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - How much does it cost to replace the exterior rearview mirror on the Fiat 500X? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side mirror on my Fiat 500? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side rearview mirror on a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos