Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Heating Resistor in a Fiat Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Checks and maintenance

As shown in this tutorial, replacing the heating resistor in a Fiat Punto is a very simple and quick operation. Before doing this, ensure that the key is not inserted to work safely. First, position yourself in the passenger seat, then go underneath the glove compartment and locate the resistor, which is situated right next to the fan. Next, unscrew the two fixing bolts using a 5.5mm socket, remove the resistor from its housing, and disconnect the power connector. To fit the replacement, simply follow the reverse procedure.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Want to remove the heater fan resistor on a Fiat Grande Punto? Let's see how to disassemble the fan resistor. Remove the plastic cover from under the…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to replace the fan resistor on a Fiat Grande Punto? Here’s how to carry out the replacement. Use a lever to remove the plastic under the front wi…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Below we will see the procedure to remove and replace the cabin fan resistor of a Fiat Grande Punto. First, get inside the vehicle on the front passe…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What problem does the Fiat Punto have with the "city mode"? Read answer
    • Punto 2005-2018 - How to bleed the Fiat Punto clutch pedal? Read answer
    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer
    • Punto 1999-2011 - How does the air conditioning of the Fiat Punto work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos