Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to remove the front seat of the Fiat Punto Evo.

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Seat
Operation: How to remove the front seat of the Fiat Punto Evo.

In this short and simple guide, we will see the instructions that will allow us to disassemble the front seat of the Fiat Punto Evo, as well as the Grande Punto. First of all, we open the front door and start unscrewing all the fixing screws that we find on the seat rails, moving the seat back and forth; to do this, we use a ratchet wrench with an extension, as shown in the video. At this point, we disconnect the electrical connector of the seat belt to permanently remove the seat from the car, applying the reverse process for reassembly!


Posted on 27 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Why doesn't the seat of the Fiat Punto slide? Read Answer
    • Punto 1999-2011 - What to do if the seat belt gets stuck in the Fiat Punto? Read Answer
    • Punto 1999-2011 - How to adjust the driver's seat on Fiat Punto street? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos