Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

This tutorial demonstrates how to remove the radio from a Fiat Bravo, a very simple and quick operation. You will need two specific keys that can be easily found online; alternatively, you can use similar tools.

First, ensure the vehicle is off for safety, then insert the keys into the slots on either side of the radio, lever them, and release the internal securing clips. At this point, grasp the entire unit, pull it from the housing, and disconnect the rear connectors.

To fit a replacement, simply follow the reverse procedure.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Remove and Reinstall the Radio in a Fiat Bravo
How to Remove and Reinstall the Radio in a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In today's tutorial, you will see the steps to remove and reinstall the standard radio in a Fiat Bravo, following these simple instructions. First, g…
How to Remove the Radio from a Fiat Bravo?
How to Remove the Radio from a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To extract the radio from a Fiat Bravo, use some thin objects as levers. Insert these objects into the slots located on the left and right sides of t…
How to Remove the Car Radio on Fiat Bravo
How to Remove the Car Radio on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Want to install a new stereo or something else in a Fiat Bravo? Carefully follow these steps to remove the existing stereo. Use the original or after…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos