Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lights on the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light

See other generations:
Video tutorial

In this tutorial, see how to remove the rear lights on the Fiat Panda, a very simple operation to perform if you need to replace a bulb or the entire unit. First, ensure the key is not in the ignition, then open the tailgate, locate the three bolts along the inner side of the light unit, and unscrew them with a cross-head screwdriver.

Once done, pull the light outwards, disconnect the internal power connector, and proceed with replacing the damaged element.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs in the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) Replacing the rear light bulbs in the Fiat Panda, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key i…
How to Remove the Rear Seats from the Fiat Panda 169
How to Remove the Rear Seats from the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, see how to remove the rear seats from the Fiat Panda 169, second series, in simple steps. First, open the rear doors and s…
How to remove the rear lights on a Fiat Panda?
How to remove the rear lights on a Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) If you need to change one or more bulbs in the rear lights of the Fiat Panda, you first need to remove the entire light unit, but this is an extremel…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos