Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights on a Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Tail light

If you need to change one or more bulbs in the rear lights of the Fiat Panda, you first need to remove the entire light unit, but this is an extremely simple operation as shown in the attached video. First, open the boot and locate the two bolts inside the light unit, which are screwed into the bodywork. Using a 10mm spanner, remove the bolts and start pulling the entire light unit towards you to release the internal clips, as visible in the video. Then disconnect the connector and unscrew the 5 star screws that hold the plate with the bulbs.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats from a Fiat Panda?
How to Remove the Rear Seats from a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the rear seats from a Fiat Panda, first, remove the carpet covering the boot and loosen the four bolts it previously covered. You will also…
How to Remove the Rear Lights on the Fiat Panda?
How to Remove the Rear Lights on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, see how to remove the rear lights on the Fiat Panda, a very simple operation to perform if you need to replace a bulb or the entire…
How to Replace the Rear Light Bulbs in the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) Replacing the rear light bulbs in the Fiat Panda, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key i…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos