Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Light of Fiat Panda 2

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Tail light

In today's video, see how to remove the rear light of a second-generation Fiat Panda in simple and quick steps. First, open the boot and unscrew the fixing screws of the rear light found on the sides using a cross-head screwdriver; then you can pull out the rear light. To completely remove it, simply disconnect the electrical connector of the bulbs located at the back: now you can take out the bulb holder to access all the bulbs of the light and replace them if necessary. Apply the reverse procedure for reassembly!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Rear Light of the New Panda
Remove the Rear Light of the New Panda
Fiat Panda (2012-2026 / 319, MK 3) How to remove the rear light on a Fiat Panda? Let's look at removing the plastic covers of the rear light. Lift the boot, and locate the screws to be…
How to Replace the Rear Headlamp Bulb on the Fiat Panda
How to Replace the Rear Headlamp Bulb on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) To replace the rear headlamp bulb on the Fiat Panda, open the tailgate to access the two bolts located between the seal and the headlamp. This will a…
How to replace the rear headlight bulbs of the Fiat Panda
How to replace the rear headlight bulbs of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will discover step-by-step instructions on how to disassemble and replace the bulbs of the rear light of the Fiat Panda. First, open the rea…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos