Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

See other generations:
Video tutorial

In this video, learn how to remove the rear light on a Fiat Panda along with the associated bulbs. Open the boot and remove the plastic cover located at the sides of the compartment (if present on the model).

Once these steps are completed, unscrew the securing bolts located at the side of the light, remove it from its housing (disconnect the power connectors), and replace any damaged bulbs with new ones (same voltage and size as the original). Finally, refit the new light, screw in the bolts, and close with the plastic cover.

Test the lights to ensure they are functioning correctly.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to remove the rear headlamp of the Fiat Panda?
How to remove the rear headlamp of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the rear headlamp of the Fiat Panda, open the boot door to access the screws that secure the headlamp. These will be located between the he…
How to Remove the Rear Light on a Fiat Panda?
How to Remove the Rear Light on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the rear light on a Fiat Panda, open the boot lid to access the screws along the seal. Once these screws are loosened, you can remove the l…
How to Remove an Original Fiat Panda Car Radio
How to Remove an Original Fiat Panda Car Radio
Fiat Panda (2012-2026 / 319, MK 3) How do you remove an original car radio from a Fiat Panda? Carefully follow this guide to execute the removal. Use the original or aftermarket metal …

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos