Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter, How to Proceed

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Air filter

Replacing the air filter is a very simple operation. The air filter should be replaced every 15,000 to 20,000 miles. The replacement is also influenced by the type of roads driven on; dusty roads require more frequent changes, even at 10,000 miles. The first step is to unscrew the screws of the filter cover. Once the cover is removed, extract the old filter, clean any dust from the inside, and carefully insert the new filter into its seat, ensuring the retaining clips are secure. Attach the filter cover and tighten the closure screws accurately.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Engine Air Filter Box
Removing the Engine Air Filter Box
Fiat Punto (1993-1999 / 176, MK 1) The video shows the removal of the entire filter box secured to the throttle body with two nuts: once the nuts are unscrewed and the vapour recovery …
Replacing the Engine Air Filter
Fiat Punto (1999-2011 / MK 2, 188) The engine air filter protects the engine from impurities that could damage it over time and contributes to increased fuel consumption and pollution.…
Engine Air Filter Replacement
Engine Air Filter Replacement
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) The engine air filter housing (air box) is located directly above the engine: to replace it, simply unscrew the front fastening screws of the filter …

Other guides you may be interested in

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos