Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

See other generations:
Video tutorial

The engine air filter protects the engine from impurities that could damage it over time and contributes to increased fuel consumption and pollution. In the Fiat Punto, it is cylindrical and located in a sealed casing above the engine, easily visible as soon as you open the bonnet.

First, remove the four screws from the cover and take out the old filter. A quick pass with a vacuum ensures that no debris or granules remain in the housing.

Then, position the new air filter and refit the cover.


Updated on 1 February 2026 by ScegliAuto


Related tutorials

Replacing Air Filter on Fiat Punto
Replacing Air Filter on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Want to replace the air filter on a Fiat Punto? Check how to remove the filter from inside the engine compartment. Lift the front bonnet to access th…
Replacing the Engine Air Filter, How to Proceed
Replacing the Engine Air Filter, How to Proceed
Fiat Punto (1999-2011 / MK 2, 188) Replacing the air filter is a very simple operation. The air filter should be replaced every 15,000 to 20,000 miles. The replacement is also influenc…
How to Replace the Engine Air Filter on a Fiat Punto
How to Replace the Engine Air Filter on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to replace the engine air filter on a Fiat Punto? Follow these steps for removal and replacement: open the car door, pull up the engine compartme…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos