Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How do you replace the diesel fuel filter of the Fiat Punto?

Fiat Punto - Video tutorial

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Diesel filter
Operation: How do you replace the diesel fuel filter of the Fiat Punto?

In order to replace the diesel filter of the Fiat Punto, you need to open the hood to gain access to the components located inside the engine compartment. In the upper left part of the engine compartment, next to the engine block, you will be able to locate the cover of the filter housing. By removing this cover, you can extract the filter located inside, so that it can be replaced with a new spare part. After the replacement, you can close the filter back into its housing with the appropriate cover, ensuring that everything is functioning correctly.


Posted on 11 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Fiat Punto diesel filter located? Read Answer
    • Punto 2005-2018 - How much does it cost to replace the diesel filter in the Fiat Grande Punto 1.3 MultiJet? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos