Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of a Fiat 500

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

In this guide, you will find instructions to remove the front door panel and how to subsequently detach the external handle of the Fiat 500. First, open the front door and start unscrewing the fastening screws located on the sides; remove the plastic cover of the handle and pry it off the sides as shown in the video.

At this point, unscrew the screw of the handle found inside, removing the plastic cover of the lock cylinder and then the handle; apply the reverse procedure for reassembly!


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel on the Fiat 500 X
How to Remove the Front Door Panel on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this guide, see the steps that will allow you to remove and replace the front door panel on the Fiat 500 X. First, open the front door and start b…
How to Remove the Handle and Lock of the Front Door of the Fiat 500
How to Remove the Handle and Lock of the Front Door of the Fiat 500
Fiat 500 (2007-2024 / 312) The instructions in this guide will show you how to remove and replace the handle and lock of the front door of the Fiat 500. First, open the front d…
Remove the Left Door Panel on Fiat 500
Remove the Left Door Panel on Fiat 500
Fiat 500 (1957-1975 / Epoca) Begin by removing the left door panel on the Fiat 500 (old model): use a screwdriver to unscrew the securing screws located in the handle, remove the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos