Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on the Fiat 500 X

Model: Fiat 500 500 X - Years 2014-2022
Part: Door trim panel

In this guide, see the steps that will allow you to remove and replace the front door panel on the Fiat 500 X. First, open the front door and start by removing the plastic cover of the opening handle; then undo all the other screws located on the door panel, as shown in the video. At this point, pry at the sides of the panel until you completely remove it, disconnecting the handle cable and the electrical connector of the window switch; for reassembly, simply apply the reverse procedure!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Front Door Glass on a Fiat 500
Remove the Front Door Glass on a Fiat 500
Fiat 500 (2007-2024 / 312) Do you want to remove the front door glass on a Fiat 500? First, use a plastic lever to remove the door trim pieces located on the door panel, then u…
How to Remove the Panel of a Fiat 500
How to Remove the Panel of a Fiat 500
Fiat 500 (2007-2021 / 312) Learn how to remove the cover panel of a Fiat 500 door. Before starting the disassembly, disconnect the battery terminals located in the engine bay. …
How to Remove the Handle and Lock of the Front Door of the Fiat 500
How to Remove the Handle and Lock of the Front Door of the Fiat 500
Fiat 500 (2007-2024 / 312) The instructions in this guide will show you how to remove and replace the handle and lock of the front door of the Fiat 500. First, open the front d…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos