Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Power Steering on the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011

Replacing the power steering requires time and patience; here’s how to remove and replace it on the Fiat Punto. First, get inside the vehicle and start by removing the plastic cover of the steering wheel by unscrewing the securing screws. Then, remove the airbag and subsequently the steering wheel by disconnecting the electrical connector and unscrewing the central screw, as shown in the video. Now, remove the indicator stalk and disconnect all electrical wiring to access the power steering; unscrew its screws to remove it, replacing or repairing it as necessary!

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) The city mode is a steering option that can be activated, which makes the steering wheel much lighter, both while driving and during parking, and is …
Fiat Punto (1999-2011 / MK 2, 188) This guide shows how to replace the electric power steering motor "city" in your vehicle. The key part is obtaining a steering column containing the …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, learn how to remove and replace the steering column of the Fiat Grande Punto, as well as the Punto Evo. First, get inside the…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos