Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Third Brake Light Bulbs on the Fiat Fiorino

Model: Fiat Fiorino MK 3 - Years 2007-2026
Part: Tail light

Driving with burnt-out third brake light bulbs on the Fiat Fiorino is not only dangerous but could also result in a fine. Therefore, replace them as soon as possible. Here's how: open the rear door on the driver's side, and inside, at the top, you will notice a rubber cap that you need to remove. This gives you access to the third brake light, which you can remove from its housing by pushing firmly. Now, operate the two levers to separate the plate that houses the bulbs. Remove the burnt-out bulbs and replace them with new ones. Before reassembling everything, check the correct operation.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light Bulb on a Fiat Fiorino
Replacing the Rear Light Bulb on a Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) Replace the rear light bulb on a Fiat Fiorino. Remove the light unit from the rear panel. Use a plastic lever to detach the number plate light unit. …
How to Remove the Air Conditioning Knobs on Fiat Fiorino
How to Remove the Air Conditioning Knobs on Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) How to remove the air conditioning knobs to replace the LEDs/bulbs on a Fiat Fiorino? Follow these steps: remove the air conditioning knob panel usin…
Resetting the Service Warning Light on a Fiat Fiorino
Resetting the Service Warning Light on a Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) In this brief guide, you will find instructions to reset the service light for regular maintenance on a Fiat Fiorino. First, get in the vehicle and p…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos