Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Headlight

Removing the front headlight on a Fiat Punto is a straightforward task you can do yourself. First, open the bonnet and start unscrewing the nuts securing the headlight, beginning with the upper ones and then the lower ones. To unscrew the lower nuts and disconnect the connector, you need to remove the wheel arch liner and then disconnect the water tube. Once all obstacles are removed, you can take out the headlight. Take a new headlight and position it in its new place, inserting all the bolts and connecting the connector. Finally, reassemble the removed parts.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on a Fiat Punto
How to Replace the Front Headlamp Bulbs on a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) How to replace the front headlamp bulbs on a Fiat Punto? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of the …
Removing the Front Headlight on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Remove the front headlight from a Fiat Punto. Open the bonnet and secure it with the prop rod; remove the front bumper (screws located in the wheel a…
How to Replace the Headlight Bulbs on a Fiat Punto
How to Replace the Headlight Bulbs on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Let's see how to replace the bulbs in the front headlight on a Fiat Punto: open the front bonnet by pulling the lever located at the bottom right of …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos