Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headlamp Assembly from the Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight

See other generations:
Video tutorial

Briefly, here are the instructions to remove and replace the front headlamp and its bulbs on the Fiat Ducato. First, open the bonnet of the vehicle and start unscrewing the screws securing the headlamp assembly to remove it; then disconnect the electrical connector of the bulbs, as shown in the video.

At this point, remove the plastic protective caps of the bulbs if you also want to replace them, replacing the entire headlamp assembly if necessary; connect the front headlamp and secure it properly with its screws!


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Fiat Ducato
How to Replace the Front Headlamp Bulb on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) To replace the front headlamp bulb on the Fiat Ducato, open the bonnet to access the components inside the engine bay. Detach the internal cover pane…
How to replace the headlight bulb on a Fiat Ducato Camper
How to replace the headlight bulb on a Fiat Ducato Camper
Fiat Ducato (2014-2026 / X290) Today's guide will show you the steps to remove and replace the headlight bulb on the Fiat Ducato Camper. First, open the bonnet of your vehicle and …
Disassembly of the front headlight of the Fiat Ducato
Disassembly of the front headlight of the Fiat Ducato
Fiat Ducato (1993-2016 / MK 2) These short and simple instructions will show us the process of disassembling and replacing the front headlight of the Fiat Ducato, also removing the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos