Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the windshield wipers of the Fiat 500.

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Windscreen wipers
Operation: How to replace the windshield wipers of the Fiat 500.

The steps for replacing the wipers on a Fiat 500 vehicle are short and simple enough to be done independently. The first step is to position the wipers vertically. The second step is to lower the clip to remove the blade from the arm. The third step is to slide the blade into the rod. Once finished with the right wiper, move on to the left wiper, following the same steps. For replacing the rear wiper, the steps are: - lift the arm; - remove the central clip; - remove the blade; - insert the blade and the central clip; Finish by testing the functionality.


Posted on 26 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - What causes the windshield wiper problem on the Fiat 500? Read Answer
    • 500 2007-2022 - What to do if the windshield wipers do not work in the Fiat 500? Read Answer
    • 500 2007-2022 - What to do if the Fiat 500 windshield wipers don't work? Read Answer
    • 500 2007-2022 - What is the problem with the windshield wiper of the Fiat 500? Read Answer
    • 500 2007-2022 - What is the cause of the problem with the windshield wipers on the Fiat 500? Read Answer
    • 500 2007-2021 - Why do the wipers no longer work in the Fiat 500? Read Answer
    • 500 2007-2023 - Why does the Fiat 500 rear wiper not work? Read Answer
    • 500 1957-1975 - Where is the water tank for the windshield wipers located in the vintage Fiat 500? Read Answer
    • 500 2007-2023 - Where is the Fiat 500 windshield washer pump located? Read Answer
    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos