Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How to remove the front bumper of the Fiat Ducato.

Fiat Ducato - Video tutorial

Model: Fiat Ducato X290 - Years 2014-2023
Part: Front bumper
Operation: How to remove the front bumper of the Fiat Ducato.

The main instructions today will show us how to disassemble and replace the front bumper of the Fiat Ducato. First, we open the engine hood and start unscrewing all the fastening screws we find on the top and bottom of the bumper; then we unscrew the additional screws on both sides of the front wheel arches, as shown in the video. At this point, we gently detach the bumper on the sides until it is completely removed, replacing it with a new one if necessary; we properly fix it on the sides and reassemble everything, applying the reverse process of disassembly!


Posted on 2 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos