Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Fiat 500 L

Model: Fiat 500 500 E, 332 - Years 2020-2026
Part: Service warning light

In this video, we see how the appearance of the flashing oil light on the Fiat 500L instrument panel reminds us to perform an oil change. After completing this important task, you need to reset the notification system. Sit in the driver’s seat, turn on the instrument cluster, press the brake and accelerator pedals fully, pump the brake pedal seven times, and wait for one minute. After this time, turn off the instrument cluster, wait sixty seconds, and start the vehicle: the absence of the flashing oil light will confirm that the reset has been successful.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you perform the service and reset the service light in the Fiat 500 X?
How do you perform the service and reset the service light in the Fiat 500 X?
Fiat 500 (2014-2022 / 500 X) In this short video guide, we see the essential steps and tools to use for a maintenance service of the Fiat 500, including changing the engine oil, …
How to Reset the Service Light on the Fiat 500 Hybrid
How to Reset the Service Light on the Fiat 500 Hybrid
Fiat 500 (2007-2024 / 312) Resetting the service light on the Fiat 500 Hybrid requires a diagnostic tool. The EOBD socket is located under the dashboard, to the left of the ste…
How to Reset the Service Light on a Fiat 500
How to Reset the Service Light on a Fiat 500
Fiat 500 (2007-2021 / ) In this video tutorial, you can see how to reset the service light on a Fiat 500 by following a step-by-step procedure for proper vehicle management.…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos