Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Shock Absorbers

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shocks

See other generations:
Video tutorial

Shock absorbers should be replaced when they no longer function, regardless of mileage. It is advisable to replace all four at the same time.

To replace them, lift the vehicle and secure it. Remove the wheel and position a jack or hydraulic lift under the spring support, lifting it slightly. Unscrew the two retaining bolts of the shock absorber with a 15mm spanner.

If the bolts are seized, use a penetrating spray, wait for it to take effect, and apply force to the spanner. Remove the old shock absorber and fit the new one, ensuring it is the same type.

It is advisable to replace the fixing bolts; if not, clean the old ones thoroughly and grease them. Use a torque wrench to tighten the bolts.

Conduct a road test to verify proper operation.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing the Shock Absorber Mounts on the Fiat Punto
Replacing the Shock Absorber Mounts on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In today's video tutorial, you will learn how to remove and replace the front shock absorber mounts on the Fiat Punto, following the instructions bel…
How to change the rear shock absorbers on the Fiat Punto
How to change the rear shock absorbers on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Replacing the rear shock absorbers is very straightforward to do yourself: it essentially involves removing the bolts that secure the eyes of the sho…
Replacing Car Shock Absorbers
Replacing Car Shock Absorbers
Fiat Punto (1999-2011 / MK 2, 188) When your car has covered many miles, it may be necessary to replace the shock absorbers, which serve to dampen the car's bumps and ensure safety whi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos