Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Shock Absorber Mounts on the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Shocks

In today's video tutorial, you will learn how to remove and replace the front shock absorber mounts on the Fiat Punto, following the instructions below. First, lift the vehicle and start by removing the front wheel; then unscrew the bolts of the suspension, both at the bottom and in the engine bay, as shown in the video. At this point, you can completely remove the suspension and the mount, replacing the latter with a new one; then reassemble everything and perform the same operation for the other suspension!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Shock Absorber on a Fiat Punto Evo?
How to Replace the Front Shock Absorber on a Fiat Punto Evo?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front shock absorber on a Fiat Punto Evo, open the bonnet to detach the cover at the base of the windscreen. Under this cover, you wil…
How to Remove the Rear Shock Absorber on a Fiat Punto
How to Remove the Rear Shock Absorber on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Let's see how to remove the rear shock absorber on a Fiat Punto. The first step: loosen the wheel nuts, lift the car on a column lift, and remove the…
How to Replace the Rear Shock Absorber on the Fiat Punto
How to Replace the Rear Shock Absorber on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Timely replacement of one or more shock absorbers on your Fiat Punto is very important as it significantly reduces the risk of accidents while improv…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos