Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Some Tips for Working Better on the Oanda MultiJet 1.3 Chain

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Timing belt

In this video, you can see some small but useful tips for working on the chain of the Panda MultiJet 1.3 Euro version. To find the timing plug for the camshaft, you will need to remove the turbocharger (located at the top) and several other parts. It is much more practical to place the stop under the injector rail, as shown by the YouTuber. This will save you a lot of time. Another important thing for working well underneath is to place a chain on the tensioner, so that everything below is free and you have the space to remove the sump from the right wing that you have previously removed.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Chain on the Fiat Panda 1.3 Multijet?
How to Replace the Timing Chain on the Fiat Panda 1.3 Multijet?
Fiat Panda (2003-2012 / 169, MK 2) To replace the timing chain on the Fiat Panda 1.3 Multijet, open the bonnet and remove the left side cover of the engine block, under which the timin…
Replacing the Timing Chain on the Fiat Panda 1.3 Multijet
Replacing the Timing Chain on the Fiat Panda 1.3 Multijet
Fiat Panda (2003-2012 / 169, MK 2) Replacing the timing chain on this vehicle is not exactly a DIY task, as it is quite complex. In this video and description, we will outline the fund…
How to unscrew the ring of the diesel filter of a Fiat Panda MultiJet
How to unscrew the ring of the diesel filter of a Fiat Panda MultiJet
Fiat Panda (2003-2012 / 169, MK 2) How to unscrew the fuel filter ring of a Fiat Panda MultiJet, without having the appropriate equipment, namely the removal key for the filter? If we …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos