Do it yourself
| ||||
|
Fiat Fullback - Video tutorial
Model: Fiat Fullback
MK 1
- Years 2015-2018 In order to reset the Service light of the Fiat Fullback, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found in the lower part of the steering column, behind the appropriate trim panel. Once this panel is removed, you can connect the scanner and select the model of the car: following the operation shown in the video, you can make the Service light disappear completely from the instrument panel, which can then be turned off by turning the key.
Posted on 6 April 2024 by ScegliAuto
How to reset the service light on a Fiat Fullback.
Fiat Fullback (2015-2018 / MK 1) To reset the service of the Fiat Fullback pickup, it is sufficient to get on the vehicle. Judging from the light indicating open doors, it is not eve Other guides that may interest you |
Fiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.160
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |