Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to manually reset the maintenance light on the Fiat Fullback

Model: Fiat Fullback MK 1 - Years 2015-2018
Part: Warning light – error code

In the following guide aimed at all of you who own a Fiat Fullback and want to manually reset the maintenance light that continues to stay on the instrument panel, all you have to do is follow the following procedure. First, turn on the instrument panel and press the button located below the speedometer several times until a small English key appears on the display. At this point, hold down the same button used earlier and wait a few moments. Finally, once the reset is complete, release the button and turn off the instrument panel to finish the procedure.

Posted on 2 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the system language of the Fiat Fullback
How to change the system language of the Fiat Fullback
Fiat Fullback (2015-2018 / MK 1) In order to change the system language of your Fiat Fullback, all you need to do is carefully read the following guide and follow the steps described…
Where is the fuse box located in the cabin of the Fiat Fullback?
Where is the fuse box located in the cabin of the Fiat Fullback?
Fiat Fullback (2015-2018 / MK 1) In the following guide, we will discover where the box containing all the various fuses of your Fiat Fullback is located. The entire procedure takes …
How do you reset the Service light on the Fiat Fullback?
How do you reset the Service light on the Fiat Fullback?
Fiat Fullback (2015-2018 / MK 1) In order to reset the Service light of the Fiat Fullback, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be foun…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos