Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light of a Fiat Doblò?

Model: Fiat Doblo Doblo 1, MK 1, 223 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light

See other generations:
Video tutorial

To change the rear light of your Fiat Doblò, follow these steps. Start by opening the boot to access the light, then remove the inner side cover of the boot to expose the light's fastening point.

Once you have access to the light, carefully unscrew the screws securing it to the vehicle. After removing the screws, gently pull the light to detach it from the bodywork.

Ensure you disconnect the electrical connector before completely removing the light. Once disconnected, you can proceed with any necessary repairs or replacements.

To fit the new light, simply follow this guide in reverse. Pay attention to details and handle the components carefully to avoid damage.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of the Fiat Doblò?
How to Remove the Rear Light of the Fiat Doblò?
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Removing the rear light of the Fiat Doblò is a very simple operation. Let's see how to proceed in this tutorial. First, open the tailgate and locate …
Remove a Rear Light from a Fiat Doblo
Remove a Rear Light from a Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Remove a rear light from a Fiat Doblo. In this video, see how to take it off and replace the damaged bulbs. Open the boot lid, and using a screwdrive…
Removing the Front Headlamp on a Fiat Doblò 1
Removing the Front Headlamp on a Fiat Doblò 1
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) This video shows how to remove the front headlamp on a first series Fiat Doblò in simple and quick steps. First, open the bonnet of your car; then, u…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos