Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light of the Fiat Multipla

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Service warning light

If you want to manually reset the service light of your Fiat Multipla but you don't know the steps you need to take, don't worry because in the following guide you will find all the instructions you need. First of all, enter the vehicle and make sure all doors are closed, then turn on the ignition and press the "Mod" button located to the right of the display. Scroll through the various menu options until you see "Manut. Prog.". Select the screen in question and scroll through the various options again until you see the screen showing the remaining kilometers until the next service. Finally, press and hold the two buttons located to the left of the display and wait for the reset to be completed.

Posted on 30 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Multipla?
How to Reset the Service Light on a Fiat Multipla?
Fiat Multipla (1998-2010 / MK 1) To reset the Service light on a Fiat Multipla, turn on the instrument panel and press the button located under the rev counter, corresponding to the …
How to Remove the Battery from a Fiat Multipla
How to Remove the Battery from a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…
How to Reset the "Service" Light on a Fiat Multipla
How to Reset the "Service" Light on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before you can start, sit in the driver's seat of your Fiat Multipla and activate the instrument panel. Begin by pressing the lower button located in…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos