Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

Today, learn how to replace the timing belt on the Fiat Scudo diesel 1900 with a naturally aspirated engine. To replace the belt on this vehicle, you need to remove the water pump first.

Once the water pump is removed, you can take off the belt by loosening the tensioner and the pulley to slide the belt off. After removing the damaged belt, insert the new one and tighten the pulley and the tensioner. Refit the water pump and check the engine and belt operation before hitting the road.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

Replacing the Alternator Belt on a Fiat Scudo
Replacing the Alternator Belt on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Today's guide will show you how to dismantle and replace the alternator belt on a Fiat Scudo in simple and quick steps. First, lift the vehicle and s…
How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…
How to reset the service indicator light on the Fiat Scudo 2
How to reset the service indicator light on the Fiat Scudo 2
Fiat Scudo (1996-2007 / MK 1) To manually reset the service light on your second series Fiat Scudo, all you need to do is follow the steps described in our new guide. First, you n…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos